




Der Gipstrimmer wird häufig in der restaurativen Zahnheilkunde eingesetzt. Es ist ein notwendiges Werkzeug zum Trimmen von Gipsmodellen. Diese Maschine ist aus rostfreiem Aluminiumguss gefertigt. Der Winkel kann zwischen 0-20° eingestellt werden, was dem Benutzer eine perfekte Trimmqualität ermöglicht.
Spezifikationen:
Spannung: 220 V/50 Hz ± 10 %
Leistung: 750 W
Maximale Belastung: 4,5 kg
Wasserdruck: 0,5-2 kg
Maße: 29 x 27 x 17 cm
Gewicht: 26 kg;
Instruction
Unpack the package, check if all the accessories are inside. Read this manual carefully before using.
Fix the model trimmer to bench with one screw on each leg to avoid shaking. Tighten all the screws on the machine
Then tighten the water pipe and the joint tightly to avoid breaking off, which might cause water splashes and damage to the motor.
Turn on the power, and check if there is any abnormal noise in the motor and check for the abrasive disc. Change the water pressure if the result is not good.
Input water.
The trimmer can be adjusted which makes it easy and convenient. The angles can be adjusted by more than 30°, the trimmer angle can be within 75°-105°.
Caution:
Water pressure less than 2kg/cm
2.Do not use the machine without water,otherwise it will damage the abrasive disc.






Recherchez plus Instrumente Zahnarzt sur dentalgerate.com
Prev: LZ LZ-VI Dental Sandstrahlgeräte mit Twin-Stift + 2 Strahltanks + LED-Licht
























































